听取蓝牙 LE 广告

一般听力

此示例显示如何侦听特定广告。

BluetoothLEAdvertisementWatcher watcher = new BluetoothLEAdvertisementWatcher();

// Use active listening if you want to receive Scan Response packets as well
// this will have a greater power cost.
watcher.ScanningMode = BluetoothLEScanningMode.Active;

// Register a listener, this will be called whenever the watcher sees an advertisement. 
watcher.Received += OnAdvertisementReceived;

watcher.Start();

广告过滤器：侦听特定广告

有时你想听一个特定的广告。在这种情况下，监听包含有效负载的广告（标识为 0xFFFE）并在广告中包含字符串 Hello World。这可以与创建蓝牙 LE 广告示例配对，以便进行一次 Windows 机器广告和另一次收听。

注意：在启动观察者之前，请务必设置此广告过滤器！

var manufacturerData = new BluetoothLEManufacturerData();
manufacturerData.CompanyId = 0xFFFE;

// Make sure that the buffer length can fit within an advertisement payload (~20 bytes). 
// Otherwise you will get an exception.
var writer = new DataWriter();
writer.WriteString("Hello World");
manufacturerData.Data = writer.DetachBuffer();

watcher.AdvertisementFilter.Advertisement.ManufacturerData.Add(manufacturerData);

信号过滤：听取近端广告

有时你只想在设备广告进入范围时触发你的观察者。你可以定义自己的范围，只需注意正常值介于 0 和 -128 之间。

// Set the in-range threshold to -70dBm. This means advertisements with RSSI >= -70dBm 
// will start to be considered "in-range" (callbacks will start in this range).
watcher.SignalStrengthFilter.InRangeThresholdInDBm = -70;

// Set the out-of-range threshold to -75dBm (give some buffer). Used in conjunction 
// with OutOfRangeTimeout to determine when an advertisement is no longer 
// considered "in-range".
watcher.SignalStrengthFilter.OutOfRangeThresholdInDBm = -75;

// Set the out-of-range timeout to be 2 seconds. Used in conjunction with 
// OutOfRangeThresholdInDBm to determine when an advertisement is no longer 
// considered "in-range"
watcher.SignalStrengthFilter.OutOfRangeTimeout = TimeSpan.FromMilliseconds(2000);

回调

watcher.Received += OnAdvertisementReceived;
watcher.Stopped += OnAdvertisementWatcherStopped;

private async void OnAdvertisementReceived(BluetoothLEAdvertisementWatcher watcher, BluetoothLEAdvertisementReceivedEventArgs eventArgs)
{
    // Do whatever you want with the advertisement

    // The received signal strength indicator (RSSI)
    Int16 rssi = eventArgs.RawSignalStrengthInDBm;
}

private async void OnAdvertisementWatcherStopped(BluetoothLEAdvertisementWatcher watcher, BluetoothLEAdvertisementWatcherStoppedEventArgs eventArgs)
{
    // Watcher was stopped
}

注意：这仅适用于在前台收听。